document number: 81646 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 1.5, 26-apr-11 1 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 1 form a solid state relay vo14642at, VO14642AABTR vishay semiconductors description the vo14642at are high speed spst normally open (1 form a) solid-state relay in a dip-6 package. the relays are constructed as a multi-ch ip hybrid device. actuation control is via an infrared led. the output switch is a combination of a photodiode array with mosfet switches. the relays can be configured for ac/dc or dc only operation. features ? high speed ssr - t on /t off < 800 s ?maximum r on 0.25 ? ? isolation test voltage 5300 v rms ? load voltage 60 v ? load current 2 a dc configuration ? dip-6 package ? clean bounce free switching ? ttl/cmos compatible input ? available on tape and reel ? pure tin leads ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec applications ? instrumentation ? industrial controls ? security notes ? iec 60747-5-2 (vde 0884) capable , consult sales representative for details ? agency approvals are valid only for ambient temperature range - 40 c to 85 c 6 s ' s dc 1 5 2 4 3 ss ' 20091 agency approvals ul1577: file no. e52744 system code h, double protection c ul - ul1577: file no. e52744 system code h, double protection ordering information vo14642axxtr part number electr. variation package config. tape and reel package ul, cul smd-6, tape and reel VO14642AABTR dip-6, tubes vo14642at > 0.1 mm 7.62 mm dip s md www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 81646 2 rev. 1.5, 26-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vo14642at, VO14642AABTR vishay semiconductors 1 form a solid state relay notes (1) stresses in excess of the absolute maximum ratings can cause pe rmanent damage to the device. functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. exposure to abs olute maximum ratings for e xtended periods of the time ca n adversely affect reliability. (2) refer to reflow profile for soldering conditions for surface mount ed devices (smd). refer to wave profile for soldering conditi ons for through hole devices (dip). absolute maximum rating curve fig. 1 - load current (ac/dc) vs. temperature absolute maximum ratings (1) (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit input led continous forward current i f 50 ma led reverse voltage v r 5v led power dissipation at 25 c p diss 80 mw output dc or peak ac load voltage v l 60 v load current (dc only) i l 2a peak load current (ac/dc) t = 10 ms i lpk 3.6 a output power dissipation at 25 c p diss 250 mw ssr total power dissipation p diss 330 mw ambient temperature range t amb - 55 to + 85 c storage temperature range t stg - 55 to + 125 c soldering temperature (2) t ? 10 s max. t sld 260 c isolation test voltage for 1 s v iso 5300 v rms 0 0.2 0.4 0.6 0.8 1.0 1.2 - 40 - 55 - 20 0 20 40 60 80 100 i f = 5 ma to 15 ma temperature (c) load current (a) 20990-1 www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 81646 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 1.5, 26-apr-11 3 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vo14642at, VO14642AABTR 1 form a solid state relay vishay semiconductors note ? the thermal model is repr esented in the thermal network below. each resistance value given in this model can be used to calcul ate the temperatures at each node for a given operating condition. the thermal resistance from board to ambient will be dependent on th e type of pcb, layout and thickness of copper traces. for a detailed explanation of the thermal model, please reference vishay ' s thermal characteristics of optocouplers application note. note ? minimum and maximum values are testing requirements. typical values are characteristics of the device and are the result of en gineering evaluations. typical values are for information only and are not part of the testing requirements. thermal characteristics parameter test condition symbol value unit maximum led junction temperature at 25 c t jmax. 125 c maximum output die juncti on temperature at 25 c t jmax. 125 c thermal resistance, junction emitter to board at 25 c ? eb 176 c/w thermal resistance, junction emitter to case at 25 c ? ec 208 c/w thermal resistance, junction detector to board at 25 c ? db 67 c/w thermal resistance, junction detector to case at 25 c ? dc 134 c/w thermal resistance, junction emitte r to junction detector at 25 c ? ed 310 c/w thermal resistance, case to ambient at 25 c ? ca 2180 c/w electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit input led forward current, switch turn-on i l = 1 a, v l ? 0.5 v, t = 10 ms i fon 0.5 2 ma led forward current, switch turn-off v l = 60 v, i l < 1 a i foff 50 a led reverse current v r = 5 v i r 10 a led forward voltage i f = 10 ma v f 11.31.5v output on-resistance (ac/dc) i f = 10 ma, i l = 1 a r on 0.18 0.25 ? on-resistance (dc only) i f = 10 ma, i l = 2 a r on 0.05 0.07 ? off-state leakage current i f = 0 ma, v l = 60 v i leak 1a t a ca t c t jd t je t b ec eb dc db ba de t a 19996 package www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 81646 4 rev. 1.5, 26-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vo14642at, VO14642AABTR vishay semiconductors 1 form a solid state relay pin configuration switching characteristics (ac/dc connection) parameter test condition symbol min. typ. max. unit turn-on time i f = 10 ma, v l = 30 v, i l = 200 ma t on 370 800 s turn-off time i f = 10 ma, v l = 30 v, i l = 200 ma t off 50 800 s turn-on time i f = 10 ma, v l = 5 v, i l = 1 a t on 550 s turn-off time i f = 10 ma, v l = 5 v, i l = 1 a t off 18 s ac/dc configuration 6 5 4 3 2 1 anode cathode do not use load load dc only configuration 6 5 4 3 2 1 anode cathode do not use 20545 20991-1 input output 10 % 90 % output v l t on t off 1.25 ms www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 81646 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 1.5, 26-apr-11 5 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vo14642at, VO14642AABTR 1 form a solid state relay vishay semiconductors note ? this ssr is suitable for safe electrical insulation only with in the safety ratings. compliance with the safety ratings shall be ensured by means of protective circuits. typical characteristics (t amb = 25 c, unless otherwise specified) fig. 2 - led forward voltage vs. current fig. 3 - led leakage current vs. temperature safety and insulation ratings parameter test condition symbol min. typ. max. unit climatic classification iec 68 part 1 40/85/21 pollution degree din vde 0109 2 tracking resistance (comparative trac king index) insulation group iiia cti 175 highest allowable overvoltage transient overvoltage v iotm 8000 v peak maximum working insulation voltage recurring peak voltage v iorm 890 v peak insulation resistance at 25 c v io = 500 v r is ? 10 12 ? insulation resistance at t s v io = 500 v r is ? 10 9 ? insulation resistance at 100 c v io = 500 v r is ? 10 11 ? partial discharge test voltage method b, v pd = v iorm x 1.875 v pd 1669 v peak isolation test voltage 1 s v iso 5300 v rms safety limiting values - maximum values allowed in the event of a failure case temperature t si 165 c input current i si 150 ma output power p so 400 mw minimum external air gap (clearance distance) measured from input terminals to output terminals, shortest distance through air ? 7mm minimum external tracking (creepage distance) measured from input terminals to output terminals, shortest distance path along body ? 7mm led forward voltage (v) led forward current (ma) 22359 0 10 20 30 40 50 0 0.4 0.8 1.2 1.6 85 c 25 c - 55 c 22360 2 4 6 8 10 12 14 - 55 - 35 - 15 5 25 45 65 85 led leakage current (na) temperature (c) v r = 5 v www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 81646 6 rev. 1.5, 26-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vo14642at, VO14642AABTR vishay semiconductors 1 form a solid state relay fig. 4 - output leakage current vs. temperature fig. 5 - led voltage vs. temperature fig. 6 - diode breakdown voltage vs. temperatur fig. 7 - led current for sw itch turn-on vs. temperature fig. 8 - on-resistance vs. temperature fig. 9 - turn-off time vs. temperature 22361 0 3000 6000 9000 12 000 - 55 - 35 - 15 5 25 45 65 85 leakage (na) temperature (c) v load = 60 v 22362 1.0 1.1 1.2 1.3 1.4 1.5 1.6 - 55 - 35 - 15 5 25 45 65 85 led voltage (v) temperature (c) i f = 30 ma i f = 50 ma i f = 10 ma i f = 5 ma i f = 1 ma 22363 16.5 17.0 17.5 18.0 18.5 19.0 - 55 - 35 - 15 5 25 45 65 85 diode breakdown voltage (v) temperature (c) i l = 5 a 22364 - 40 - 20 0 20 40 60 80 - 55 - 35 - 15 5 25 45 65 85 led forward current for s witch turn-on (%), normalized to 25 c temparature (c) i l = 1 a 22365 0.6 0.8 1.0 1.2 1.4 1.6 1.8 - 55 - 35 - 15 5 25 45 65 85 on-re s i s tance, normalized to 25 c temperature (c) i f = 10 ma i l = 1 a 22366 5 9 13 17 21 25 - 55 - 35 - 15 5 25 45 65 85 turn-off time ( s ) temperature (c) i f = 10 ma, i l = 1 a, p w = 2.5 m s www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 81646 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 1.5, 26-apr-11 7 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vo14642at, VO14642AABTR 1 form a solid state relay vishay semiconductors fig. 10 - turn-off time vs. led fig. 11 - turn-on time vs. temperature fig. 12 - turn-on time vs. led fig. 13 - load current vs. load voltage fig. 14 - switch capacitance vs. applied voltage 22367 1 16 31 46 61 76 5101520 turn-off time ( s ) led (ma) i l = 1 a, p w = 2.5 m s - 55 c 25 c 85 c 22368 450 500 550 600 650 700 750 - 55 - 35 - 15 5 25 45 65 85 turn-on time ( s ) temperature (c) i f = 10 ma, i l = 1 a, p w = 2.5 m s 22369 200 400 600 800 1000 1200 1400 1600 1800 5101520 turn-on time ( s ) led (ma) i l = 1 a, p w = 2.5 m s - 55 c 25 c 85 c 22370 - 1200 - 800 - 400 0 400 800 1200 - 0.25 - 0.15 - 0.05 0.05 0.15 0.25 load current (ma) load voltage (v) i f = 10 ma - 55 c - 10 c 25 c 85 c 0 50 100 150 200 250 300 350 0 20 40 60 applied voltage (v) switch capacitance (pf) 20765 www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 81646 8 rev. 1.5, 26-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vo14642at, VO14642AABTR vishay semiconductors 1 form a solid state relay package dimensions in millimeters package marking note ? tape and reel suffix (tr) is not part of the package marking. i178014_2 0.20 0.30 3.30 3.81 0.84 typ. 7.62 typ. 0.84 typ. 2.54 typ. 1 min. 0.46 0.51 1.22 1.32 6.3 6.5 8.5 8.7 pin one id 6 5 4 1 2 3 18 3 to 9 7.62 to 8.81 4 typ. iso method a 8 min. 4.6 4.1 0.7 option 7 3.30 3.81 7.62 typ. 8.4 min. 10.3 max. 2.54 r 0.25 1.78 0.76 1.52 8 min. 11.05 vo14642 v yww h 68 www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. www.datasheet.co.kr datasheet pdf - http://www..net/
|
